Home  >  Products > LED STAIR&WALL LIGHT

BELITE 5w IP67 outdoor led step light RGB DC24V 40 degree

Power: 3W/5W

LED: CREE/CITIZEN

CRI:  80 / 90

SDCM: 3 / 5

CCT: 2700K / 3000K / 4000K / 6000K

Control: Remote / On-Off

Input Voltage:24V/12V DC

Dimming: DALI / DMX512 / 0-10V / 1-10V / Triac

Beam Angle: 40°

Material: CNC 6063# aluminum

Installation: Recessed Mounting Box

Waterproof: IP65

Certification: CE EMC LVD, ROHS, IP67 etc.

Warranty: 3-5 Years

Download
Material Specifications
MODEL NO.POWERINPUT VOLT.LENS DEGREELED COLORLUMENFINISHMATERIAL
BL-REWL0301
3W

24V/12V DC

40°
3000-5000K/R/G/B
250lmMatt Silver Anodized
Aluminum
BL-REWL0501
5W550lm


LED:CREE/CITIZEN. 

Housing: CNC 6063# aluminum ,Matt silver/black anodized Finish or powder coated. 

Lens: Optical lens, efficiency>85%. 

Glass Cover: Tempered glass. 

Driver: Constant current output.Constant current output. 

Power Cable: H05RN-F 2*1.0MML=0.5M ( Low voltage). 

Operating Temperature: -20℃~40℃

Dimmable Support:Triac/PWM/0-10V/DALI/DMX512. 

Finish:Matt Silver/ Black Anodized. 


Parameter Data

微信截图_20211014151540.png微信截图_20211014151551.png

Installation Instruction

1. For Installation without mounting sleeve

1.1 Drill a hole on a decking with a thickness of 12-24mm;

      Make sure the depth inside is at least 100mm.   (See Fig 1.1)

1.2 Connect the 12/24V supply cable via waterproof junction box or connector. (See Fig 1.2)

      CAUTION: MUST USE IP67 OR IP68 JUNCTION BOX.

1.3 Connect the light fitting cable to the junction box. (See Fig 1.3)

1.4 Switch on the mains supply, check and make sure the light fitting is on.

1.5 Locate the light fitting into position securely.

微信截图_20211014153817.png


2.For Installation with mounting sleeve

2.1 Recess the mounting sleeve into ground, always leave enough space under the mounting sleeve, for the

      waterproof junction box and gravel for drainage.

      The mounting sleeve is 120mm in height.   (See Fig 2.1)

2.2 Connect the 12/24V supply cable via waterproof junction box or connector. (See Fig 2.2)

      CAUTION: MUST USE IP67 OR IP68 JUNCTION BOX.

2.3 Connect the light fitting cable to the junction box. (See Fig 2.3)

2.4 Switch on the mains supply, check and make sure the light fitting is on.

2.5 Locate the light fitting into mounting sleeve securely.

微信截图_20211014153719.png


CONTACT US
  • E-mail: sales@belite-led.com
  • Tel: +86 758 2801 258
  • Fax: +86 758 2801 266
  • Add:2F, Bldg.7,No.308,Lianhai Rd, Jianghai District, Jiangmen City, GD.P.R. China
FOLLOW US