LED: Citizen COB
Housing: 12#Die-casting powder coated aluminum.T=60-80um. Adhesion of ISO class 1/ASTM class 48
Front Cover: 316# tainless steel---Hard Chromeplated
Glass: Tempered glass.T=10mm
Material Specifications----------
LED: Citizen COB
Housing: 12#Die-casting powder coated aluminum.T=60-80um. Adhesion of ISO class 1/ASTM class 48
Front Cover: 316# tainless steel---Hard Chromeplated
Glass: Tempered glass.T=10mm
Lens: Optical lens, efficiency≥90%
LED Driver: Constant voltage input, Constant current output
Cable Gland: IP68 copper and nickel coated
Gasket: Tooling shaped seal
Mounting Sleeve: PVC
Working Temperature: -20 to 40℃
Power Cable: H05RN-F 2x1.0mm² L=2M
Item No.: | LED Power | Input Volt.: | Lens Degree | CCT | Size: | Cutout | IP | IK | ||||||
DUL0501 | 5*1W | 24V AC/DC 12V/AC/DC | 24° 40°60° | 3000K-5000K/R/G/B | φ64x101mm | D57MM | 67 | IK08 | ||||||
DUL0301 | 3*1W | φ64x64x101mm | 67 | IK08 |
Item: DUL0301/0501 Series
Spec: Stainless Steel 3W/5W LED RECESSED LIGHT, IP67, 12VAC/DC
Note: 1. A 12V transformer or constant voltage driver is required (not included).
2. For DUL0501 Series, input wattage must be 50% higher than the rated LED wattage to insure LED start-up.
3. Fittings must be connected in parallel.
4. Always switch off the mains supply before installation.
1. For Installation without mounting sleeve
1.1 Drill a hole on a decking with a thickness of 12-24mm; Make sure the depth inside is at least 100mm. (See Fig 1.1)
1.2 Connect the 12V supply cable via waterproof junction box or connector. (See Fig 1.2)
CAUTION: MUST USE IP67 OR IP68 JUNCTION BOX.
1.3 Connect the light fitting cable to the junction box. (See Fig 1.3)
1.4 Switch on the mains supply, check and make sure the light fitting is on.
1.5 Locate the light fitting into position securely.